Device Manager is a tool found in all Windows computers to help users download and install updated drivers. Below is how to use it to download and install the update for Windows 11/10 Fresco Logic USB VGA display driver.
Above we elucidated all the manual methods to download the Fresco Logic USB VGA display driver for Windows 10/11. These manual ways are complicated and a bit time-consuming. Hence, to save you precious time and effort, we recommend downloading and installing the updated drivers via a program like Bit Driver Updater.
Fresco Logic Usb 3.0 Driver For Mac
After you are done downloading and installing Bit Driver Updater, wait for two to three seconds to get a list of problematic drivers. Once you know which drivers are outdated, you may Update All these outdated drivers with a single click on the designated button to do it.
The above was all about downloading and installing the updated Fresco Logic USB display driver for Windows 11/10. Now, you might be interested in knowing what to do if your USB display driver is not working for any reason. Well, as a bonus for our readers, we talk about the same in the following section of this article.
The driver might not be installed correctly if you tried to do the installation manually. Hence, you may try reinstalling the Fresco Logic USB display driver if it is not working. Below is the process to do it.
Outdated drivers are among the most prominent causes of almost all problems like the Fresco Logic USB VGA display driver not working. Hence, you may follow the above guide to download the driver update and install it.
This article communicated the best possible methods to download and install the updated Fresco Logic USB display driver for Windows 11/10. Moreover, we also discussed how to fix the issues if the driver is not working.
When I rebooted my mac, it hung up on the boot page with the apple logo. The boot process hangs even though the loading bar is completely filled. I can't start my computer now so I'm trying to delete the driver via recovery mode. I think it is one of the kext files in Library/Extensions, but there are so many and none of them say frescologic.
My macbook pro is a 2015 model with Mac OS Mojave installed. Unfortunately I don't have a filevault backup so uninstalling the driver is my only hope of recovering my work. Is there an easy way to identify this kernel extension and am I even looking in the right place?
I've been looking everywhere for a driver or chipset info for the unbranded "Mini HD USB 3.0 HDMI Adapter" for years. I finally dug though enough duck duck go results to find a page that claims it uses the Fresco logic USB display driver, which brought me here.
This driver is tested on Ubuntu 14 LTS as well as some Android platforms with kernel version 3.10.x. This driver source might not compile on newer kernels (eg. 4.0 or above) because of the fast-moving API changes in the mainstream kernel. You might need to adapt it for your own use.
thank!! happened))communication with you helped me remember another way)Device manager > errror fresco > Update driver > Browse my computer > Let me pick from a list of device driver> Have Disk...> mu fresco driver))
(c) Download, decompress the Fresco Logic registry fix. Insert the fix into your registry, by double clicking it on windows. This registry fix only inserts a key used by the FL driver to disable the U1/U2 power states I think, but you are using this at your own risk.
I started trying out various Fresco Logic drivers I could get my hands on. I have tried, without success, versions: 3.5.93.0, 3.5.88.0, 3.5.73.0, 3.5.46.0, 3.5.30.0, 3.5.24, 3.5.2.0. Version 3.5.24 seemed to be working, but when I pushed the drive by transferring lots of data simultaneously, the device disconnected.
I have contacted AsRock Support (yet again) and these guys have been great in sending me driver v3.0.100.58 which actually works!! To save the day for anyone with the same problem I have made a backup of this working driver!
I bet you tried hard and I know how it feels; I got similar treatment at the time. Fresco Logic (the controller manufacturer of my computer) just ignored my very specific requests for support; probably they knew already the problem existed with their drivers; not sure.
Back to your problem. Given that you tried the WD on other laptops and it works without problems that does point the finger to the Asus laptop. However, do double-check that the different laptops did have the same OS (e.g. win 10) with your Asus, so you can have a fair field to compare, at least as far as the OS goes. Beyond that, you could try to bypass the Asus driver and install the Intel USB drivers from Intel. Maybe you can work with this: -USB-3-0-eXtensible-Host-Controller-Driver, otherwise try to locate which drivers are compatible with that of your laptop. See if you can replace the Asus-supplied driver and helps solve your problem (at your own risk of course :) )
Thank you for sharing your extra efforts on this problem. I had the exact same problem with a WD My Passport 1TB USB 3.0 Portable hard drive and my Fresco FL1000 USB3.0 driver on Windows. It is working perfectly now!
You saved my day, or rather my evening. Have the exact same wd passport as you and had to play detective for about an hour to conclude it must be a problem with the usb 3.0, Fresco, just as yours. And your driver WORKS. Excellent ,and thank you.
Workaround (a) I think implied that you will probably use a well tested, quality USB 3.0 controller coupled with good drivers, so you are indeed changing hardware configuration and there are plenty of those that we know that the drive works. As for the Y-cable, I think it is a good solution for laptops that are known to have issues with power on their usb ports, but for desktops with on-board usb3.0 ports, that should not be an issue, although for some people that can be the case. Not for me.
Drivers installed are the official ones provided by Asus : _Fresco_Win8_64_Z35730.zipAs you can see, drivers are provided with a patch, but I'm not sure if it's really installed, the batch file doesn't seem to return anything.Any help will be appreciated :)PS: I think that guy pointed out something related to my issue : -US/a3748df9-18bf-48b7-a834-a99c9de84e3b/2-problems-after-updating-to-windows-81?forum=w8itprohardware&prof=requiredBut I'm not sure what I can do with this.
Thank you for your reply, Here's Asus support answer :Dear sir, Thank you for your e-mail.In this case i would advise you to make use of the "Go Back function" in windows 10.Since your system has been delivered with Windows 7, we do not provide this system with drivers for Windows 10 yet.Probably Windows updates will provide this device with drivers through windows updates in the future.We would advise you to go back to your previous Windows OS till your system will be compatible with Windows 10.A/V is uninstalled and SFC said it fixed some things but issue is still there.Kind regards
The driver roll-back that I mentioned in my previous post was the solution to the problem. Crazy that I had to roll back to a driver that was already outdated when my computer was released but that is what fixed the problem. Anyone having similar problems should check drivers and consider rolling back to the earliest available driver they can find. Test it then update one version at a time until it stops working. Go back to the last version and leave it at that.
The fix for me has been to update the Fresco Logic xHCI (USB3) Controller driver to version 3.5.30.0 - but this is not the newest version, and as kyroguy pointed out, newer versions of the driver caused the same problem. So it seems there is a narrow range of Fresco Logic driver versions that properly support this drive - older versions and newer versions of the driver do not work.
It sounds like you may be experiencing a device-specific issue associated with power management. Power management has been enabled more aggressively in these recent drivers, which would explain why you are seeing this issue with our most up-to-date software.
To update your USB drivers in Windows 10, go to Settings > Update & Security > Windows Update, then click Check for Updates. Windows will search for available updates, including driver updates. Alternatively, navigate to Device Manager and click Universal Serial Bus Controllers. Right-click the device you're having an issue with and select Update Driver.
To reinstall a USB driver, navigate to Device Manager, right-click the name of the device you're having an issue with, and select Uninstall. Restart your PC, and Windows will automatically reinstall the driver.
To uninstall USB drivers, navigate to Device Manager, click the View menu, and enable Show Hidden Devices. Find the type of device you're dealing with, then expand the menu, right-click your device, and select Uninstall. In the confirmation dialog, click Delete the driver software for this device > OK.
To uninstall the Fresco Logic USB display driver, you can go to the Add/Remove Program feature in Windows Control Panel. In Windows Vista/7/8/10, click the Add or Remove Programs tab and select Uninstall a program. On Windows XP, click the Add or Remove Programs tab and select Change/Remove. The removal process will begin, and a progress bar will display how long it will take. This driver runs on Windows OS releases and PC manufacturers install it on their systems.
First, uninstall the Fresco Logic VGA Display Driver from your computer by following the instructions provided by the computer manufacturer. In most cases, the driver is located in C: Program Files (x86) and can be easily removed with the Control Panel or by using CMD on your Mac. Alternatively, you can also manually uninstall the Fresco logic USB display driver from your computer by launching the command prompt in your operating system. 2ff7e9595c
Comments